SANFORD CORP -- EXPO DRY ERASE MARKERS CHISEL TIP, BLACK  -- 7510-00N072178
<pre>=====================  Product Identification  =====================

Product ID:EXPO DRY ERASE MARKERS CHISEL TIP, BLACK
MSDS Date:12/20/1994
FSC:7510
NIIN:00N072178
=== Responsible Party ===
Company Name:SANFORD CORP
Address:2740 WASHINGTON BLVD
City:BELLWOOD
State:IL
ZIP:60104
Country:US
Info Phone Num:800-228-5635
Emergency Phone Num:800-228-5635
CAGE:86874
=== Contractor Identification ===
Company Name:SANFORD CORPORATION
Address:2740 WASHINGTON BLVD.
Box:City:BELLWOOD
State:IL
ZIP:60104
Country:US
Phone:1-800-323-0749
CAGE:86874

=============  Composition/Information on Ingredients  =============

Ingred Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:RESIN; (RESINS)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE)  (HEXONE)
    (SARA 313) (CERCLA) BP:>237F, >114C; (ING 5)
CAS:108-10-1
RTECS #:SA9275000
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ING 3:SPEC GRAV;0.800-0.803 @ 68F; VP:16 @ 20C; VAP
    DENS:3.5; EVAP RATE:1.64 (N-BUAC=1); APPEAR & ODOR:CLEAR (ING 5)
RTECS #:9999999ZZ

Ingred Name:ING 4:LIQUID, STRONG KETONE-LIKE ODOR; FLASH POINT:60F,
    15.6C; LEL:1.4%.
RTECS #:9999999ZZ

Ingred Name:ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA)
CAS:123-86-4
RTECS #:AF7350000
OSHA PEL:150 PPM
ACGIH TLV:150 PPM/200STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
    UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
    1500. THE PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
    CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
    W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
    MD	. SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:60.0F,15.6C
Lower Limits:SEE ING 3
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
    SOLID WASTE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
    MARKER WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
    SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SEE ING 3
Vapor Pres:SEE ING 3
Vapor Density:SEE ING 3
Spec Gravity:SEE ING 3
Evaporation Rate &amp; Reference:SEE INGREDIENT 3
Appearance and Odor:SEE INGREDIENT 3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE.
Stability Condition to Avoid:NOT AVAILABLE.
Hazardous Decomposition Products:NOT AVAILABLE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . DISCARD AS SOLID WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.